Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Hollister
If your chimney is cracked, leaking, or pulling away from the roofline, you’re in the right place. We handle chimney repair in Hollister for homeowners dealing with the older masonry and clay-tile flues that make up so much of the housing here. Our technicians have up to 14 years of experience, and we know the specific ways a Hollister chimney fails: seismic movement, damp coastal fog, aging brick. Call (844) 834-5211 to set up a free estimate.
Why Hollister Homeowners Call Salinas Chimney Sweep for Chimney Repair
We do three things and we do them all ourselves: sweep, inspect, and repair. No subcontracting, no handing you off to a second contractor once the diagnosis is made. That matters in a town where the person who cleans your flue often isn’t the person qualified to rebuild a crown or reline a separated stack.
Homeowners in Hollister call us because we tell them what we found, what it means, and what their options are, in that order. Nothing gets recommended without camera evidence you can look at yourself. That single rule separates us from the sweep who hands you a clipboard and a four-figure quote with no pictures attached.
We use the same materials chimney engineers specify: DuraFlex for flexible liner systems, HeatShield for ceramic flue resurfacing, Olympia Chimney and Gelco for components. Professional-grade parts, not hardware-store substitutes. That’s not a slogan; it’s why the repair holds up.
For a town the size of Hollister, our scheduling is straightforward. Call (844) 834-5211. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and the price you agree to is the price on the written estimate.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Flashing Repair in Hollister
Chimney Flashing Repair in Hollister is one of the first things we look at, because the flashing is where most roof leaks around a chimney start. The metal that seals the gap between the chimney and the roof covering takes a beating from the coastal fog that rolls through this valley. Once the seal fails, water gets behind the flashing and into the roof deck, and you see the stain on the ceiling before you see the damage on the roof.
When a Hollister homeowner needs flashing repair, it’s usually after a wet winter or a stretch of fog, when a damp patch shows up near the chimney. The job means lifting the roofing material at the chimney, replacing the old flashing with new metal, sealing it properly, and checking that the counter-flashing is cut into the masonry. A typical flashing repair in Hollister runs $350-$750, depending on roof pitch and how much material has to be worked back into place. The written estimate sets the final price.
What a Sound Flashing Job Includes
New step flashing woven into the roof courses, counter-flashing set into a reglet cut into the brick, and a sealant rated for masonry. We check the chimney chase for corrosion too, because rusted flashing on old brick houses is common here. If the flashing can wait a season without letting water in, we’ll tell you.
Telling Flashing Leaks From Crown Leaks
Water near the chimney can come from the flashing, the crown, or the brick itself. A camera inspection and a close look at the mortar joints tell you which. Guessing wastes money; the evidence doesn’t lie.
Chimney Crown Repair in Hollister
Chimney Crown Repair in Hollister often comes down to the same root cause: the concrete cap on top of the chimney cracking and letting water in. The crown is the overhanging slab that sheds water away from the brick. When it cracks, water runs down the outside of the flue and into the masonry, and the freeze-thaw of damp winters here opens those cracks wider over time.
A Hollister homeowner typically needs crown repair when a hairline crack becomes a visible gap, or when the crown has crumbled at the edges. The fix means removing the failed material, forming a new crown with the correct slope away from the flue, and sealing it. A typical crown repair in Hollister runs $400-$900. A full crown rebuild on a wide masonry stack can run higher, into the $1,200-$1,800 range. The written estimate sets the final price.
A New Crown Needs the Right Slope
The crown has to shed water, so it’s built with a pitch that sends it away from the flue. A flat or back-sloped crown is a leak waiting to happen. We form it properly rather than smearing sealant over a crack and calling it repaired.
When to Rebuild Instead of Patch
If the crown is broken across more than a third of its surface, or has separated from the flue, patching won’t hold. Rebuilding costs more up front and lasts far longer. We’ll show you which one your chimney needs.
Trusted Brands We Service in Hollister
We work with professional-grade chimney supply brands: DuraFlex for flexible liner systems, HeatShield for ceramic flue resurfacing, and Olympia Chimney and Gelco for components. These are the names chimney engineers specify, not what you find on a hardware-store shelf. We don’t claim to stock parts in Hollister; what we do is specify the right material for your chimney and get it quickly, so a repair doesn’t stall waiting on a part that fits. HeatShield ceramic resurfacing deserves a note here: it can restore a deteriorating flue without a full reline, which most sweep-only companies can’t offer. That’s one more reason to ask what’s being installed before you agree to anything.
Common Chimney Repair Problems We See in Hollister Homes
- Seismic damage to clay flue tiles. Hollister sits on the San Andreas Fault, and even moderate shaking can shift clay tiles and separate the joints. That opens a path for creosote and moisture to leak into the smoke chamber and attic.
- Cracked brick crowns. Seismic movement and damp winters crack the crown, letting water spall the mortar and rust the damper. A crown that looks fine from the ground can be failing up close.
- Third-degree creosote in unlined flues. Many of Hollister’s older and Victorian-era farmhouses have unlined or narrow flues. Those accumulate glazed creosote that brushes can’t touch, and fall winds make ignition a real risk.
- Corroded flashing on aging roofs. The metal flashing around older chimneys rusts and pulls loose. That’s the most common source of the damp stains homeowners notice after a wet season.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Hollister, CA
Repair prices in Hollister follow the scope of the work, and we give you a written estimate before anything starts. A typical flashing repair runs $350-$750. Crown repair runs $400-$900, and a full crown rebuild on a large masonry stack runs $1,200-$1,800. Mortar repointing and spalling brick repair, common on the mid-century brick chimneys here, generally fall in the $500-$1,500 range depending on how much mortar has to be cut out and replaced. Chimney waterproofing runs $300-$600 for a standard stack. What moves the price is access, roof pitch, how much material is failing, and whether the flue itself needs relining. The estimate is free, and the written estimate sets the final price. Call (844) 834-5211 for yours.
We Also Serve Cities Near Hollister
The same repair work we do in Hollister extends to the towns around it: Ridgemark, Aromas, Prunedale, and Salinas. If you’re just outside the city limits, ask when you call and we’ll confirm the details for your address. Our chimney repair service covers the full range, from flashing and crown work to relining and rebuilding.
Serving Hollister, CA – Our Local Coverage Area
We serve Hollister and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Hollister
Because the San Andreas Fault runs through this area, and even a moderate quake can shift clay flue tiles and crack a crown, we check for seismic cracking and flue separation before and after sweeping. A flue that was sound last season may not be sound now, and sweeping a damaged flue can make it worse. Call (844) 834-5211 to book an inspection with camera evidence.
Often, yes. HeatShield ceramic resurfacing can restore many unlined and deteriorating flues from the inside without tearing down the chimney. Whether it’s the right fix depends on the condition the camera shows. Call (844) 834-5211 and we’ll show you what we find before recommending anything.
You usually can’t from the ground, and that’s the honest answer. A camera inspection and a close look at the crack pattern tell the difference between seismic movement and ordinary age cracking. We don’t guess at it; we look. Call (844) 834-5211 for a free estimate.
First-degree creosote is a light soot a brush removes easily; third-degree is glazed, hardened creosote that brushes can’t touch and that raises fire risk when it ignites. Hollister’s prolonged shoulder-season burning builds it up, and fall winds make ignition a real concern. Call (844) 834-5211 and we’ll show you what’s in your flue.
Yes. Chimneys fail from water, seismic movement, and age even when they sit unused, and an unused flue can hide a cracked crown or separated tiles. An inspection documents the condition so you have a written record. Call (844) 834-5211 for a free estimate.
Call Us for Chimney Repair in Hollister
Whether it’s a cracked crown, failed flashing, or an older flue that needs honest attention, we’ll show you what’s wrong before we recommend a fix. One call covers cleaning, inspection, and repair, with professional-grade materials and a written estimate that sets the price. Call (844) 834-5211 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Salinas Chimney Sweep.